Indonesia type approval: March 2010

Tuesday, March 30, 2010

VSAT Antenna MS-PF-37C

In the last recent article Manufacture VSAT Indonesia, We inform about VSAT antenna device MS-PF-37C and MS-PF-46C has been tested and found to have been in accordance with the provisions of the applicable regulations in Indonesia with type approval certification issued by DGPT. VSAT Antenna MS-PF-37C by Dian Citra, PT one of product categories VSAT with material from Glass Fiber, Operating frequency Receive 3.625 - 4.200 GHZ and Transmit 5.850 - 6.425 GHZ.
Specification VSAT Antenna MS-PF-37C :

ELECTRICAL

Affective Apenture : 3,7 ( meter ) ( 12 ft )
Operating Frequency :

Receive : 3,635 - 4,200 GHz
Transmit : 5,850 - 6,425 GHz

MIdband Gian ( +/-1) :

Receive : 40,78 dBi
Transmit : 43,81 dBi

Polarization : Linear ( Co - or Cross - Pol )
3 dB beamwidth :

Receiver : 1,4 deg
Transmit : 0,9 deg

Power handling capability : 500 Watts
Fisrt sitelobe ( typical ) : - 22dB
Cross Pol Isolation : > 30 dB min ( on axis )
VSWR : 1,3 : 1 Max
Antenna Noise Temperature :

10 deg : 32 deg K
20 deg : 25 deg K
30 deg : 30 deg K

Feed Interface :

Receive : Type N Connector
Transmit : CPR-137 ( Optional )

MECHANICAL

Reflector material : Glass fiber Reinforced polyster SMC
Antenna optics : 8 piece axisymmetric, Prime focus.
Mount Type : Elevation over Azimuth
Elevation Adjustment Range : 10 to 70 deg Continuous Fine Adjustment ( 90 deg Optional )
Azimuth Adjustment Range : 360 deg (Continuous )
Mast Pipe Side : 6"SCH 410 Pipe ( 6.62" OD ) 16,82 CM

ENVIRONMENTAL PERFORMANCE

Windloading :

Operational : 45 mph 72 km/h
Survival : 110 mph 177 km/h

Temperature :

Operational : (-) 40 to 144 deg F (-) 40 to 60 deg C
Survival : (-) 50 to 140 deg F (-) 46 to 71 deg C

Rain :

Operational : 1/2"/ hr
Survival : 2 '' / hr

Shipping Specification : 715 lbs / 322 kg
Don't forget used telecommunication devices has been type approval certification by DGPT.

Monday, March 29, 2010

Modem Celular CDMA Digilink WD-108

Indonesia type approval blogspot.com image

In March 2010 Modem Cellular CDMA Digilink WD-108 has been issued type approval in Indonesia, the holder certificate telecommunication is Perdana Sinar Prestasi. PT or we call PSP.
The modem cellular CDMA Digilink WD-108 is third project certification, in which the previous 2 telecommunication devices that has been type approval certification in 2009 ago among other :

Digilink Wireless USB Adapter DL-U90G
Digilink USM Modem Cellular 3G WT-881

specification of the usb modem stick of Digilink WD-108:

Technical Parameters:

CDMA2000 1X RTT 800MHz band
Receive Frequency:869.04-839.37 MHz
Transmit Frequency:824.04-848.97 MHz
Data Transmission up to153kbs
Internal antenna
Operating System:Windows NT4.0/SP/6a/98/ME/2000/XP/Vista
Control via AT-Command
USB 1.0 0r 2.0 interface
R-UIM application toolkit
Supply voltage range 5-5.3 V
Low power consumption
Weight: 21.5 gram

Key Features :

Browse the Internet,
Send and Receive E-mails,
Two-way SMS,
Telephone Function

Requirements:

300MHz CPU,
256MB RAM,
Microsoft Windows Vista/XP/2000,
Internet Explorer 5.5 or later,
40MB free hard disk space.

Thursday, March 25, 2010

D-Link | DSL-2740B Rangebooster N ADSL2/2 + Modem Router

The Rangebooster N ADSL2/2 + Modem Router connects a group of users to Internet, allowing multiple computers at home or the office to share an integrated high speed ADSL2/2 + interface. It provides high performance draft 802.11n wireless access for wireless networked computer, 4 built-in Ethernet port, firewall protection and QoS for smooth and secure download/upload of photos, files, music, video and e-mail over the Internet.

Get high ADSL & wireless performance :
Ready ADSL connection with up to 24 Mbps downstream and 1 Mbps upsteam. Watch TV, listen to live music and broadcast on the Internet, and experience clear Internet phone calls. Built-in high-performance draft 802.11n wireless LAN means that you don't have to compromise high-speed ADSL transmission with wireless speed constraints, now, smooth streaming multimedia and VoIP are possible anywhere at home and in the office, without even the need to hook up any network wires.

In Indonesia Rangebooster N ADSL2/2 + Modem Router DSL-2740B has been issue type approval certification March 17 Th 2010 and with the same date wireless N Pocket Router/AP DAP-1350.

Package contents DSL-2740B :

DSL-2740B Rangebooster N ADSL2/2 + Modem Router
CD-ROM D-Link Click's connect, Manual and Warranty
Ethernet ( CAT5 UTP ) Cable
Power Adapter
RJ-11 cable

Feature :

IEEE 802.11n (draft), 802.11g, and 802.11b Standards
ADSL2/2 + compliant - capable of download of up to 24 Mbps
Biult-in NAT/SPI firewall and Instruction detection system
4-port 10/100 switch

Friday, March 19, 2010

Wireless N Pocket Router/AP DAP-1350

In March 17Th 2010 in Indonesia Wireless N Pocket/Ap DAP-1350 and Mobile wireless Router DIR-412 telecommunication devices D-Link, has been issued type approvacertification by DGPT March 15Th 2010.

Create a wireless network by connecting the DAP-1350 to an Internet connecting whether via Ethernet cable or 3g USB Adapter to enjoy wireless to connectivity for multiple PC's we you are out on the road in places like conference rooms or hotel rooms.
You can connect a 3G USB adapter to share your 3G Internet connection on the road, enabling you to provide multiple PC's with instant connectivity.

Contents of packaging :

Wireless N Pocket Router/AP DAP-1350
Ethernet cable - CAT5
Power Adapter 5v 2.5A
USB power cable
Travel case
CD ROM includes technical manual

Product setup : Easy setup : AP Mode

Switch to AP ( access point ) Mode : Move the move switch on the DAP-1350 to the AP position. In this mode, the DAP-1350 will function as an access point.
Connect to a router : Use the included Ethernet cable to connect the DAP-1350 to an available LAN port on your router. Make sure DHCP on your router is enabled. Connect the power adapter to the DAP-1350. Wait until the power LED changes from red to blue.
Connect to the DAP-1350 : Use a PC with wireless adapter enabled wireless networks. Connect to the network with D-Link as the SSID
Configure the DAP-1350 : Open a web browser and go to http://dlinkap. Enter admin as the user name adn leave the password blank. Now you can use the setup Wizard to configure your DAP-1350.

Product setup : Easy setup : Client Mode

Swich to CL Mode : Move the move swich on the DAP-1350 to CL position. In this mode, the DAP-1350 will function as a wireless client.
Connect to your PC : Use the Ethernet cable to connect the DAP-1350 to your desktop or laptop PC. Connect the power adapter to the DAP-1350. wait until the power LED changes from red to blue.
Configure the DAP-1350 : Open a web browes and go to http;//dinkap. Enter admin as the User Name and leave the password blank. Now you can use the setup Wizard to configure your DAP-1350.
Connect wireless : After completing the setup Wizard, you can connect to a wireless network.

Product setup : Easy setup : Router Mode

Switch to RT Mode : Move the move to the RT position. In this mode, the DAP-1350 will function as a router
Connect to your Modem : Use the included Ethernet to connect the DAP-1350 to the LAN port on your modem. Connect the power to the DAP-1350. Wait until the Power LED changes from red to blue.
Connect to the DAP-1350 : Use a PC with a wireless adapter enable to open a web browser and Scan for available wireless networks. Connect to the network with dlink as the SSID
Configure the DAP-1350 : Open a web browser and go to http://dlinkap. Enter admin as the user name leave the password blank. Now you can use the setup Wizard to configure your DAP-1350.

Technical specification Wireless N Pocket Router/access point DAP-1350 :
Standard

IEEE 802.11b
IEEE 802.11g
IEEE 802.11n 2.4GHz
IEEE 802.3u

Interface type

Mode selection switch ( Router/Access point/Client )
10/100 WAN/LAN Port
USB Port foe 3G adapter' and Share Port
WPS Button
Reset button

operating Frequencies

2.4 to 2.4835 GHz

Operating Channels

FCC 11
ETSI:13

Operating Modes

Router mode
Access Point Mode
Wireless Client Mode

Antenna Type

2 Integrated Antennas

Security

64/128-bit WEP
Wi-Fi Protected Access ( WPA-PSK, WPA2-PSK )
Wi-Fi Protected Setup ( WPS PIN/PBC )
MAC Address Fettering
Disable SSID Broadcast function

LED

Power
Lan
WLAN

Certification

FCC Class B
CE
C-Tick
Wi-Fi, PS/Wi-Fi Protected setup
IC

Quality of service

Wi-Fi Multimedia ( WMM )

Dimensions

91mm x 65mm x 21mm ( 3.58in x 2.56in x 0.85in )

Weight

64 grams

Storage temperature

10 to 70 C ( 14 to 158 F )

Storage humidity

5% to 95% non-condensing

Mobile Wireless Router DIR-412

In Indonesia, Mobile Wireless Router DIR-412 D-Link product has been issued type approval certification in march 15th 2010 by DGPT and the DIR-412 has been tested by Indonesia test house.
The DIR-412 Mobile wireless router enables users to create a person mobile network HSDPA/HSUPA/EV-DO/TD-SCDMA or to easily share Internet connection wireless, The DIR-412 Mobile wireless router turns a 3G mobile network into Wi-Fi access service with enrypted and high speed 802.11n connection, you are easy connected to Internet.

Contents of packaging :

Mobile wireless router DIR-412
Ethernet cable CAT5
Power adapter 5v 2.5A
CD-ROM include technical manual

Product setup : easy setup : 3G Connection mode

Switch to 3G Connection Mode : Move the mode switch on the DIR-412 to the 3G Router position. While in this mode, the DIR-412 will use the 3G modem to connect to the Internet.
Install the 3G USB Adapter : plug the USB modem into the USB port of the DIR-412
Connect to the DIR-412 : plug one end of Ethernet into the DIR-412. Plug the other end of the cable inti your PC's Ethernet port. You may also connect to the router wireless.
Configure the DIR-412 : Open a web browser and go to http://192.168.0.1. enter admin as the User Name, and leave the password field blank. You may use the setup wizard to configure your DIR-412

Product setup : easy setup : WAN Connection mode

Switch to WAN Connection mode : Move the move switch on the DIR-412 to the WAN position. In this mode, the DIR-412 will function as a wireless router
Connect to a cable/DSL Modem : Plug one end of the Ethernet cable into the DIR-412. Plug the other one of the cable into you cable/DSL modem.
Conncet to the DIR-412 : Use a PC with a active wireless adapter to open a web browser and scan for available wireless networks.Connect to the network with the SSID labeled d-link.
Configure the DIR-412 : Open the web browser and go to http://192.168.0.1. enter admin as the User name, and leave the password field blank. you may use the setup Wizard to configure your DIR-412

Technical Specifications Mobile wireless router DIR-412 :

Compatible mobile Networks

1 x EV-DO/CDMA
HSUPA/HSDPA/UMTS

Standards

802.11n
802.11g
802.11b
802.3
802.3u

Wireless Security

64/128-bit WEP (Wired Equivalent Privacy)
WPA & WPA2 (Wi-Fi Protected Access)
WPS (PBC/PIN)

FIREWALL

Network Address Translation (NAT)
Stateful Packet Inspection (SPI)
MAC Address Filtering
Website Filtering

VPN

L2TP/PPTP/IPSEC VPN Pass-through
PPTP/L2TP Connection

PORTS

1 x Ethernet (RJ-45)
1 x USB 2.0
ANTENNA
Internal antenna

LED Status Indicators

Power
Internet
Wireless
Ethernet
WPS

DIMENSIONS (L x W x H)

122 x 97 x 27 mm

Operating Temperature

0˚ to 40˚C (32˚ to 104˚F)

Operating Humidity

10%-95% (Non-condensing)

POWER

DC 5V/2.5A +/- 5%

Advanced Feat res

3G Modem / Ethernet WAN Backup
Auto WAN Failover
QoS Management

CERTIFICATION

CE
FCC
ROHS Compliant

Wednesday, March 17, 2010

DWM-151 WCDMA| HSDPA 3.5G Dongle

This telecommunication product DWM-151 WCDMA/HSDPA 3.5 G Dongle has been issued type approval certification in february 17th 2010 and has been tested by Indonesia test house.

The DWM-151 WCDMA/HSDPA 3.5G Dongle allows user with a computer to connect to worldwide mobile Broadband networks. While connected, user can transfer data, stream media, and send SMS messages.

Effortless Installation :
Simply insert your SIM/USIM into the slot and connected to your mobile service provider. Device drivers and software are built into the device making installation fast and simple. The included software provides access telephone number and data stored on the SIM/USIM card.

Optimal performance with 3.5G HSDPA Technology:
Support the latest 3.5G High Speed Down link Packed Access ( HSDPA ) technology. Which offers improved data rates and helps to reduce latency 3.5G is also backward compatible with 3G and 2.5G technologies

Micro SD card Installation : Insert the Micro SD card as shown in the photo.
Feature :

Support 3.6Mbps HSDPA services
SMS and phone book support
Plug and play

Certification of telecommunication provisions in Indonesia

The following is information about the certification provisions applicable in Indonesia.
Certification of telecommunication is issued by Directorate General of Posts and Telecommunication ( DGPT ), which for each type of telecommunication equipment while telecommunication equipment series approval is not acceptable. The validity period of the certificates is 3 (three) years from the date of issuance. At any time if there is a change either in technical or administrative aspect of product Stated in this certificate, it is the responsibility of the applicant to submit such change to DGPT. Any failure to notify DGPT about aany technical or administrative change may invalidate the certificate.

Renewal of certificate may be required when there is any technical and administrative change in approved telecommunication equipment or certificate expiry. Returning the original certificate and re-evaluation on such approved telecommunication equipment will be conducted as appropriate.

The certificate holder obliged to produce and affix label on each unit of all equipment covered by the certificate. The certificate holder has to take responsibilities on appropriate consumer protection as well as the safety of equipment covered by the certificate.

Suspension of certificate :
Any of the following may cause immediate suspension of the DGPT :

* Failure in service or redesign of the equipment covered by the certificate.
* Substantial change in management organization.
* Refusing to access DGPT personnel for periodic for periodic or annual audits.
* Failure to pay certification fees

Label :
The label must prominently display the following 2 (two) components of information: The size of the label is depend on the size or the surface of equipment and it shall be visible by bare eyes. In any case that the equipment is not possible to affix the label, the appereance of label in manual book and product packing is allowable. Marking and lettering can be of any size or color.

Wednesday, March 10, 2010

Venus VT-18 EVDO Multi

The Venus CDMA USB VT-18 EVDO Multi product has been type approval certification telecommunication in Indonesia by DGPT march 4th 2010. And this product has been tested by Indonesia test house or Balai besar pengujian perangkat telekomunikasi ( BBPPT ).

Operating Frequency Venus VT-18 EVDU Multi :

Tx : 824.025 MHz - 848.985 MHz
RX : 869.025 MHz - 893.985 MHz

Venus CDMA USB Modem VT18 EVDO Multi is USB type CDMA Wireless modem CDMA 2000 1x EV-DO tehnology for laptop PC slim and compact. Design frequency : 800MHz and 1900 MHz; Chipset : Qualcomm MSM6805; Data communication and SMS Support; Compatible with IS-95A, IS-95B and 1xRTT; USB Modem; R-UIM card support.

Services

Solution for obtaining type approval certification telecommunication in Indonesia :

1. New Application for Type Approval Certification :

Advice on Approval Strategy
Preparing complete application package engineering test support
Local interfacing with regulatory officials on your behalf
Reduce unnecessary bureaucracy
No Surprises Fee Structure

we charge per application. Our service fees do not include the testing expense and certificate expense. Testing and Certificate Expense are the fix expense after legal letter of payment (SP2) has been issued by DGPT, but we can estimate these for you based on the details of specific equipment.

2. Re-extend :

The validity period of the certificates is three years from the date of issuance. As the validity dues, certificate must be renewed except:

The equipments are no longer for sale/trade
The equipments are no longer for use

The renewal of certificate must be reapplied in the prior of 60 days before the expiration of the certificate.

The application must enclose:

Original certificate
A statement containing that there has not been any changes on equipments.

3. Labeling :

Certificate holder is obliged to label the equipments at least in 60 days since the issued certificate Labeling will cover all the certified equipments If the labeling can not be done on the equipments, then must be labeled on the seal, boxes, or the manual instructions.

The label must prominently display the following two components of information:

The number of certificate and PLG ID unique number.

We have long year of experiences and we design our services in order to reduce cost also to eliminate unnecessary bureaucracy.

To ensure the quality of our services to all clients, We established a strong relationship with every government institutions and departments which related to the type approval process such as Directorate General Post & Telecommunication (DGPT), TELKOM, Ministry of Industry, Department of Trade, Directorate General of Customs & Excise, Seaport custom & Airport Custom.

We would provide you with all of the latest information without any ilegal moves. Our goal is to help our clients to achieve legal documents and papers according to the law, regulations and government policy. We are one of the legal and authorized agent you could trust.

Document requirement

To start with the project, please prepare these certain documents :

Copy of agency, sole agent or distributor agreement from manufacturer (For sole agent or distributor only)
Power of Attorney
Form PM.4
Form PM.5
Technical specification
Operational manual
Foreign test report (optional)
Required 2 units for a Customer Premises Equipment (CPE) category while non CPE required 1 unit.

As part of our service, we will do administrative work for the PM 4 and PM 5 forms, therefore you are required to provide us a power of attorney letter and the complete technical data. The completeness of the technical documents will be appreciated.

Friday, March 5, 2010

Wireless G USB Multifunction Print Server DPR-200

The DPR-2000 Wireless G USB Multifunction Print Server Provider four USB 2.0 port for connection to USB printers. This device lets you cost-effectively share your USB Printers with a group of users at home or in the office over wireless connection. supporting multiple network operating systems, this device brings a high level of flexibility and performance to your printing needs.

Features DPR-2000 Wireless G USB Multifunction Print server :

Support GDI printers
Wi-Fi protected setup (WPS)
Supports Multifunction printers, print and fax functions
Web based management

In December 21st 2009 Wireless G USB Multifunction Print Server DPR-2000 has been Type Approval Certificate Telecommunication In Indonesia by Directorate General of Post and Telecommunication and has been tested by Indonesia testing house.

Xtreme N Dual Band Gigabit Router DIR-825

D-lik DIR-825 Xtreme N Dual Band Gigabit Router is access the internet quickly and easily from any where in your home or offices. enjoy less Interference and choose the best frequency for your aplication. Surf safely with firewall protection and parantal controls.

Features :

High speed wireless for gaming, music, voice and video.
Xterme N Dual band technology for superior dual band wireless performance
Green Ethernet technology - for energy savings

D-Link DIR-825 Xtreme N Dual Band Gigabit Router has been issued type approval certificated from Directorate General of Posts and Telecommunication Indonesia in December 21st 2009, and the device has been through the process of testing the device at the test house center, with the results in accordance with the regulations in Indonesia, as one of the certification requirements.

Thursday, March 4, 2010

Bluetooth certification in Indonesia

Based on kepdir 09/dirjen/2004 about bluetooth technical requirements in Indonesia. Bluetooth is a wireless network system with the information intended as a sender and receiver of data information, with the allocati0n of frequency for bluetooth in 2.4 - 2.4835 GHz.

Bluetooth technical requirements in the testing device as follows:

A. Frequency allocation for bluetooth devices 2.4 - 2.4835 GHz.

B. Out power: (Power Class)

Power Class 1. Maximum out power: 100 mW (20dBm), Nominal Output Power: N / A, Minimum Output: 1 mW (0 dBm), Power Control: 4 to +20 dBm-30 to 0dBm, Optional.
Power Class 2. Maximum out power: 2.5 mW (4 dBm), Nominal Output Power: 1 mW (0 dBm), Minimum Output: 0:25 mW (-6 dBm), Power Control: -30 to 0 dBm, Optional.
Power Class 3. Maximum out power: 1 mW (0 dBm), Nominal Output Power: N / A, Minimum Output: N / A, Power Control: -30 to 0 dBm, Optional.

C. Spread spectrum is permitted Frequency Hopping Spread Spectrum (FHSS) or Direct Sequence Spread Spectrum (DSSS).

D. Effective Radiated Power ? -10 dBW (100 mW) EIRP.

E. Modulation Characteristics:

1. Modulation = Gaussian Frequency Shift Keying (GFSK)
2. Modulation index = 0.32 ± 1%
3. BT = 0.5 ± 1%
4. Bit Rate = 1 Mbps ± 1 ppm
5. Modulation data = PRBS9
6. Frequency Accuracy = ± 1 ppm

F. Spurious emissions refers to the ETSI 300 328.

G. Bluetooth devices must be qualified by the Bluetooth Qualification Body (BQB).

For information testing cost equipment and type approval fee, you can see here.

Manufacture VSAT Indonesia

In early January 2010, this could be a new history for PT. Dian Citra located in Cirebon, West Java, Indonesia as one of the factories producing brand VSAT antennas MS. which already has been issued type approval certification of telecommunication devices by the Directorate General of Post and Telecommunications in January 27th 2010, the VSAT antenna device MS-PF-37C or the 3.7 meter dish size and Vsat antenna MS-PF-46C or the 4.6 meter dish size, made of the fiber raw material has been tested by test house Indonesia with the test methods on site test as mandatory requirements in obtaining certification, and is now ready to be marketed in Indonesia.

If you want to order this product, please sent email to susilo[at]typeapprovalindonesia[dot]com or indonesia[dot]typeapproval[at]gmail[dot]com. So don't forget using telecommunication devices has been certificated.

USB Modem Huawei E 1550

USB Modem Huawei E 1550 one of the telecommunication devices subur semesta has been issued Indonesia type approval in December 2009 and Huawei E 1550 USB Modem has been tested by test house telecommunication device in Indonesia.

Huawei E1550 small form and easy to use on your laptop and PC, with system requirements Windows 2000/XP/Vista or Mac OS X 128MB of RAM, 50MB free disk space of above, the USB slop.

Specification huawei E1550 :

HSDPA/UMTS 2100 MHZ
EDGE/GPRS/GSM 1900/1800/900/850 MHz
HSDPA data transfer speed up to 3.6Mbps
USB interface
Install automatically and easy to use
Micro SD Memory card slot

Access Piont DAP-1360

I was inform about the D-Link products telecommunication devices that have been published telecommunication certification from the Directorate General of Post and Telecommunications of the republic of Indonesia for Wireless N Access Point DAP-1360 in 21 December 2009 have been published.

Wireless N Access Point to share your Broadband internet connection with multiple computer in your home or office by simply connecting Wireless N Access Point. you can now create your own personal wireless home or office network to share your internet connection, documents, music and photos.

Wednesday, March 3, 2010

the test payment notification letter

In last my post at type approval certification, I inform about the laboratory reference letter, after the laboratory reference letter 0r ( Sp2 pengujian perangkat ) in process by BBPPT.

BBPPT can make sure how much testing expense devices, we can to know all testing fee device in the test payment notification letter. and we must payment to the State Treasury .

Testing payment notification letter or (Sp2 pengujian) is an information test expense :

Bill number :
Date bill :
Overdue payments :
Laboratory reference letter number :
Name of the device :
Brand / type / model :
Country of manufacture :
Component testing :
Testing expense :

Payment test expense is a mandatory expense to deposit at bank mandiri with accoont Recipients DGPT Treasurer. So please to use telecommunication devices has been certificated by Directorate of General Post and Telecommunication

The laboratory reference letter

The laboratory reference letter or Surat pengantar pengujian perangkat ( SP3 ) is a letter reference from Directorate of General Post and Telecommunication to Test house or Balai Besar pengujian Perangkat telekomunikasi ( BBPPT ) for Tests conducted in the laboratory.

In the laboratory reference letter to same information about telecommunication device :

1. Name of the device :
2. Brand / model / type :
3. Made In :
4. Agent / factory :
5. Reference :
6. Receipt No. / Date :

has met the requirements for testing at the institute of testing device (BBPPT) and Balai besar pengujian perangkat telekomunikasi ( BBPPT ) has been issued out details test expense in the form of bills that must be paid to the state treasury.

Label certification

If you want buy some product telecommunication, I inform a good idea to refer to the tips and tricks that we fit in this blog, by selecting the type of device that has an official certification label by DGPT has been through the process of certification , and the device has been tested by testing house Indonesia so that the device works well and does not interfere with telecommunications networks.

As a form of manifestation of government protection for consumers or user equipment / telecommunication equipment, especially in our country, the Government has been issued GOVERNMENT REGULATION INDONESIA NOMOR 52 tahun 2000 ON THE IMPLEMENTATION OF TELECOMMUNICATIONS that requires each manufacturer, importer who markets equipment products in Indonesia must be have certification

The telecommunication device has been certification and each manufacturer and importer must be make label certification on part of the device, if not possible can be made on packaging or packaging that can easily be seen, Number certificate and Number ID customers. Certificate holder shall put the label that made their own certificates on each tool at the latest telecommunication equipment 60 days since the certificate issued.

For users of telecommunications devices you please check whether the device you have or you have just purchased a certified label.

Why telecommunication devices must be certification

Because certification is given before products are marketed in Indonesia, all approved product carry approval labels. If there is no label, you should not buy that product. It could a prohibited model. The danger is that prohibited product may interfere with i.e. The cellular networks, causing interference to other user’s hand phones.

To protect consumer interests, the enforcement officer regularly inspect shops selling telecommunications equipment to ensure that there is compliance with the licensing conditions. Equipment vendors importing or selling non certified equipment for use in Indonesia are liable to face prosecution.

So please using the telecommunication equipment has been certified.

Indonesia type approval proceure

This is certification procedure in Indonesia, from the procedure we can see with clear process how early we began to application and requirements for certification to the end of certificate issued.

In the certification procedure, we can also know how long the time for the certification process based on certification of procedure, and we can to know information certification fee, and than information about certification telecommunication device in Indonesia.

Indonesia type approval services

I have an information about solution for obtaining type approval certification in Indonesia :

1. New Application for Type Approval Certification :

Advice on Approval Strategy
Preparing complete application package engineering test support
Local interfacing with regulatory officials on your behalf
Reduce unnecessary bureaucracy
No Surprises Fee Structure

The equipments are no longer for sale/trade
The equipments are no longer for use

The renewal of certificate must be reapplied in the prior of 60 days before the expiration of the certificate.

The application must enclose:

Original certificate
A statement containing that there has not been any changes on equipments.

Copy of agency, sole agent or distributor agreement from manufacturer (For sole agent or distributor only)
Power of Attorney
Form PM.4
Form PM.5
Technical specification
Operational manual
Foreign test report (optional)
Required 2 units for a Customer Premises Equipment (CPE) category while non CPE required 1 unit.

Testing method telecommunication devices

Testing method telecommunication devices for type approval certification telecommunication devices In Indonesia procedure. In test house Indonesia or ( Balai Besar pengujian Perangkat Telekomunikasi ) have 2 categories testing method for telecommunication devices :

1. Tests conducted in the laboratory BBPPT.
2. Tests conducted outside laboratory BBPPT.

What is different the tests conducted in laboratory BBPPT or test conducted outsite laboratory BBPPT. where on the sample devices will be tested directly given to the BBPPT officers . But in testing conducted outside laboratory, the devices sample testing to be replaced by a recommendation letters to be make sure sample device which states that the test would have been installed and ready for field testing conducted.

In the process tests conducted out laboratory, the BBPPT form 1 team testers for make sure the devices sample has been installed and do it testing.

Test house in Indonesia

I will inform about of testing house telecomunication device in Indonesia. Balai besar pengujian perangakat telekomunikasi or ( BBPPT ) is institutions who is responsible in the process of testing the telecommunication device in Indonesia. This institutions can make sure that every telecommunication devices will work properly in Indonesian network, before those application telecommunication device to getting type approval certification by Directorate General of Post and Telecommunication

That type of testing device by BBPPT consists of :

Testing tools / Telecommunication devices Based Radio.
Testing tools / Telecommunication devices Based Non-Radio.
Testing tools /Telecommunication divices Calibration Services.
Testing tools/Electromagnetic Compatibility.

To serve testing devices, Balai besar pengujian perangkat telekomunikasi supported by the Telecommunication Infrastructures with Radio Laboratory, Laboratory of Non-Radio, EMC Laboratory, and Calibration Laboratories.
The amount of equipment and telecommunication devices that circulate in Indonesia and the increasing need felt by the people, the Great Central Telecommunications Testing device continuously develop both the infrastructure and capabilities of human resources. Because the test device process maximum 21 working days.

Certification fee

Based on Government Regulation (PP No.. 7 in 2009) about the type and rate of state revenues rather than taxes applicable to the DGPT as the basis of the imposition of fee for certification and testing fee in Indonesia.

Certification fee telecommunication devices :

Customer Premises Equipment (CPE) cable Rp 2,250,000.-
Customer Premises Equipment (CPE) Wireless RP 4,500,000.-
Non-CPE Transmission Rp 6,000,000.-
Non-CPE Broadcasting Rp 6,750,000.-
Non-CPE Central Rp 9,000,000.-

Testing fee telecommunication devices :
Category 1 testing fee :

Registrar Data Speaker Phone Rp 3.500.000.-
Fax Rp 4,000,000.-
Fax with a Bluetooth facility Rp 5,000,000.-
Fax with Cordless facility Rp 6,000,000.-
Fax with Cordless and Bluetooth facility Rp 8,000,000.-
Analog Telephone (Pespon) Rp 3,500,000.-
Telephone/key Wireless Phone sd 20 port Rp 4,500,000.-
Public Telephone Multi Coins Rp 4,000,000.-
Communication Data Rp 3,000,000.-
Modem Rp 4,500,000.-
Aircraft Cordless Phone / Telephone Public Wireless Rp 4,000,000.-
Cellular Telephone Band 1 Rp 4,500,000.-
Cellular Telephone Band 2 Rp 6,000,000.-
Cellular Telephone Band 3 Rp 7,500,000.-
Cellular Telephone Band 4 Rp 9,000,000.-
Paging Rp 3,500,000.-
Low Power devices Rp 2,000,000.-
Bluetooth = Rp 2.000.000,-
Radio Trunking Rp 4,000,000.-
Radio Communications Handheld Terminal Rp 4,000,000.-
Radio Communications Portable Terminal Rp 6,000,000.-
Wireless Local Area Network (LAN) indoor Rp 4,000,000.-
Wireless Local Area Network (LAN) outdoorRp 6,000,000.-
Radio Communication Equipment Inter Population Rp 4,000,000.-
Radio Amateur Rp 4,000,000.-
Very Small Apperture Terminal (VSAT) Rp 6,000,000.-
Interace Radio Access Rp 4,000,000.-
Booster Rp 2,000,000.-
RectifierRp 7,000,000.-
Terminal Satellite (Satellite Terminal) Rp 4,500,000.-
Recipient Satellite (Satellite Receiver)Rp 6,000,000.-
RepeaterRp 8,000,000.-
IP Phone Rp 4,500,000.-
Media GatewayRp 6,000,000.-
Router Rp4,500,000.-
Router WLAN Rp 6,000,000.-
PABX Analogue (PSTN Base) Rp 5,000,000.-
Digital PABX (IP Base) Rp 6,000,000.-
Antenna Rp 6,000,000.-
Radio Maritime Rp 4,000,000.-
EDC Integration Terminal Single Rp 3,000,000.-
EDC Integration Terminal Double Rp 5,000,000.-

Category 2 testing fee :

Digital Loop Carrier Rp 9,500,000.-
Broadcast Radio Transmitter / Repeater RP 6,000.000,-
Television Transmitter / Repeater RP 8,000,000.-
Channel multiplier Rp 6,000,000.-
Radio Microwave Rp 7,000,000.-
Multiplexer Rp 5,000,000.-
Base Transceiver Station (BTS) Rp 8,000,000.-
Radio Base Station (RBS) Rp 8,000,000.-
Base Station Controller (BSC) Rp 10,000,000.-
Mobile Services Switching Center (MSC) RP 10,000,000.-
Radar / Radio Location Rp 8,000,000,-

Indonesia type approval certification

Type approval certification is a guarantee of telecommunication device can work well and than guarantee telecommunication device has been in accordance with the specification and meet standard in each country. because every telecommunication device have to approved process through testing in each respective a country.

Balai besar pengujian perangakat telekomunikasi or ( test house) is institutions that are responsible in the process of testing the telecommunication device in Indonesia.

Directorate general of posts and telecommunication is institutions that are responsible issued Certificate of telecommunication device that provides information about telecommunication device has been certificate in Indonesia:

1. Certificate number
2. PLG ID number
3. Reference
4. Country of origin
5. Product of
6. Mode / type
7. Proposed by
8. Address
9. Date of issued
10. Note

Should you have further enquiries regarding Type Approval certification or our services, please do not hesitate to contac

Pages