The DIR-412 Mobile wireless router enables users to create a person mobile network HSDPA/HSUPA/EV-DO/TD-SCDMA or to easily share Internet connection wireless, The DIR-412 Mobile wireless router turns a 3G mobile network into Wi-Fi access service with enrypted and high speed 802.11n connection, you are easy connected to Internet.
Contents of packaging :
- Mobile wireless router DIR-412
- Ethernet cable CAT5
- Power adapter 5v 2.5A
- CD-ROM include technical manual
- Switch to 3G Connection Mode : Move the mode switch on the DIR-412 to the 3G Router position. While in this mode, the DIR-412 will use the 3G modem to connect to the Internet.
- Install the 3G USB Adapter : plug the USB modem into the USB port of the DIR-412
- Connect to the DIR-412 : plug one end of Ethernet into the DIR-412. Plug the other end of the cable inti your PC's Ethernet port. You may also connect to the router wireless.
- Configure the DIR-412 : Open a web browser and go to http://192.168.0.1. enter admin as the User Name, and leave the password field blank. You may use the setup wizard to configure your DIR-412
- Switch to WAN Connection mode : Move the move switch on the DIR-412 to the WAN position. In this mode, the DIR-412 will function as a wireless router
- Connect to a cable/DSL Modem : Plug one end of the Ethernet cable into the DIR-412. Plug the other one of the cable into you cable/DSL modem.
- Conncet to the DIR-412 : Use a PC with a active wireless adapter to open a web browser and scan for available wireless networks.Connect to the network with the SSID labeled d-link.
- Configure the DIR-412 : Open the web browser and go to http://192.168.0.1. enter admin as the User name, and leave the password field blank. you may use the setup Wizard to configure your DIR-412
Compatible mobile Networks
- 1 x EV-DO/CDMA
- HSUPA/HSDPA/UMTS
- 802.11n
- 802.11g
- 802.11b
- 802.3
- 802.3u
- 64/128-bit WEP (Wired Equivalent Privacy)
- WPA & WPA2 (Wi-Fi Protected Access)
- WPS (PBC/PIN)
- Network Address Translation (NAT)
- Stateful Packet Inspection (SPI)
- MAC Address Filtering
- Website Filtering
- L2TP/PPTP/IPSEC VPN Pass-through
- PPTP/L2TP Connection
- 1 x Ethernet (RJ-45)
- 1 x USB 2.0
- ANTENNA
- Internal antenna
- Power
- Internet
- Wireless
- Ethernet
- WPS
- 122 x 97 x 27 mm
- 0˚ to 40˚C (32˚ to 104˚F)
- 10%-95% (Non-condensing)
- DC 5V/2.5A +/- 5%
- 3G Modem / Ethernet WAN Backup
- Auto WAN Failover
- QoS Management
- CE
- FCC
- ROHS Compliant
1 comment:
I have the dwm152 usb data card, and the dir412 mobile wireless router, and am trying to create a wireless signal using both, and a macintosh. I live in Costa Rica, and the service is new for the one ISP here - and this country and this profile don't show up in the mobile router online set-up page. I believe this is the reason I can't connect - b/c the router can't determine the country. Are there any solutions to this problem? I get the full wireless signal in the mac, and it says I am connected, but then within the admin for the dlink router - there is no info in the wan connection box. Any thoughts on this? thank you.
Post a Comment